MAX4466 Electret Microphone Module

Product Code: MAX4466
7,70 USD

Stock: In stock (23 Pieces)

Add to Favorites
  • Features
  • Dimensions
  • Comments (0)
  • Payment Options
  • How Will We Ship To You?
  • Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!

    This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!

    Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.

    The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.
  • All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 3 Payment Methods:

    • Credit Card Payment (Secure 128 bit SSL encrypted)
    • Bank Transfer (Swift)
    • Western Union
  • All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 2 Shipment Options:

    • Registered Air Mail ( Fixed Price 9,95 USD, Free On Orders Over 199 USD)
      DHL Worldwide Express Shipment (Based on weight)

    Example Time Table For International Shipments with Air Mail

    Europe Countries

    2-3 Weeks (Sometimes Less)

    USA

    3-4 Weeks

    *Mexico

    4-6 Weeks

    African Countries

    4-6 Weeks

    Japan

    2-3 Weeks

    Qatar

    3-4 Weeks

    Brazil

    3-6 Weeks

    Malaysia

    4-5 Weeks

    *Peru, Ecuador, Colombia

    4-6 Weeks

    Philippines

    4-6 Weeks

    Russia

    3-4 Weeks

    Saudi Arabia

    3-4 Weeks

    Middle Asia Countries

    3-4 Weeks

    Azerbaijan

    2-3 Weeks

    Mongolia, China

    4-6 Weeks

    United Kingdom, Ireland

    3-4 Weeks

    Latvia, Estonia, Lithuania

    3 Weeks

    Canada

    2-3 Weeks

    *Mexico, Peru, Ecuador & Colombia shipments can lose too much time at transits after exiting.

    We are sending shipment code but this can be only trackable inside your country. We suggest this countries to DHL express (3-5 Days arrival time) for more reliable and tracking option.

    These countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)

    What is your return policy?

    You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).

    If we shipped you the wrong product, or it arrived defective or damaged

    No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.

T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.
Prepared by  T-Soft E-Commerce.