Commander 6Ch + Acc RC Remote System (Receiver & Transmitter)

Product Code: JSRC6CH
39.00 USD
Add Battery?


Stock:In stock (37 Pieces) Add to Favorites

Jsumo Robot parts shipment and price information
  • Features
  • Dimensions
  • Comments (0)
  • Payment Options
  • How Will We Ship To You?
  • Are you looking for a great and affordable way to control your robot while it is located in a distance up to 500 meter?

    Commander Remote System is the right product for your next robot project. Plug & play remote has six different channels that mapped to transmitter's 2 axes joysticks (4 channel total), potentiometer (1 channel) and switch (1 Channel) with combination of Accelerometer unit. With all features Commander is perfect for combat robots, sumo robots and more.

    RC Remote System Features

    • Transmitter works with 1 cell 18650 battery that can be charged with built-in charger at remote.
    • RGB Led for Different Modes. (Red standart stick control, blue Accelerometer control)
    • Accelerometer control mode for controlling robot with roll & tilt of remote.
    • 6 Seperate channel interface.
    • Binding feature with different frequencies for projects where many controllers are used (such as robot tournaments) 

    Dimensions & Weights

    Transmitter: 167 mm x 98mm x 51mm (without antenna), 80.1 grams

    Receiver: 42mm x 24mm x 23mm (without antenna), 16.3 grams

    Remote Transmitter (Tx) Side

    This part is where all action happens. It includes mini joysticks, potentiometer and switch circuits with accelerometer (mapped to 2 channel with selectable switch) and built-in 18650 battery charger (battery not included).

    Remote works with 2 different modes, RC stick control (RGB LED will light up red) and Accelerometer Control (RGB LED will light up blue).

    At transmitter you will see one RGB led at right top side. Here is the Tx RGB Led Meanings

    - Blinking Red Light = Low Power, Please charge. You can charge the Tx battery (not included) with traditional micro usb type phone charger.
    - Steady Red Light =  Stick Control
    - Steady Blue Light = Accelerometer Control
    - Purple = Binding Mode (used for connection between Tx & Rx, for opening this mode you need to push the left joystick button while turning on Transmitter)

    Channel List

    • Ch1: Left Joystick up & down.
    • Ch2: Left Joystick left & right.
    • Ch3: Right Joystick up & down.
    • Ch4: Right joystick left & right.
    • Ch5: Jotentiometer knob (can be used for changing motor speeds, different light levels at receiver side...)
    • Ch6: Switch (can be used for firing some mechanism, adding diferent mode to robot...)

    When you select acclerometer mode, Channel 1 will be remote's tilt angle and Channel 4 will be remote's roll angle.

    How to select with manual control vs Accelerometer Control Mode?

    Easy. You can choose mode by mini switch at left. The mode will be changed directly.

    Battery Charger Usage

    You can charge remote's battery (not included) directly from the transmitter. For this, you can turn off the remote and plug the standard mobile phone charging cable (micro usb type) into the usb socket in the upper right corner.

    Remote Receiver (Rx) Side

    Outputs of 6 independent channels are in this module. It is necessary to supply 5V electricity externally. For this, you can use the power inputs at the top of the pins.

    At receiver side we have 2 LEDS at Rx: 

    - Red Led: Power Led. It will turn on to show electricty.
    - Blue Led: It will be only turn on when Binding mode is active (at start 6th channel signal connected to GND for binding)

    How to Bind Receiver & Transmitter?

    1. For binding attach jumper cable to remote's 6th channel between signal and gnd and apply 5V voltage (that can be 4 cell Nimh or 1 cell Charged Li-Ion too) to the (-,+) input. 
    2. And turn on the transmitter with On/OFF switch while pushing Left joystick's button. 

    Where that can be used? 

    • RC Sumo Robots & mini sumo robots.
    • Combat robots, Sozbots, battlebots.
    • FIRST competitions.
    • Explorer robots.

    Note: Remote is not recommended for racing drone control. Only recommended for ground vehicles, robots and educational type generic drones.

  • Weight (Kg)
  • All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 3 Payment Methods:

    • Credit Card Payment (Secure 128 bit SSL encrypted)
    • Bank Transfer (Swift)
    • Western Union
  • All products shipped with sealed in box. All products packaged carefully. Before shipment, we test all electronics and control the mechanics of all products. So you will never be disappointed when you open our JSumo shipment box.

    We have 2 Shipment Options:

    • Registered Air Mail (Fixed Price 9,95 USD, Free On Orders Over 199 USD)
      DHL Worldwide Express Shipment (Based on weight)

    Example Time Table For International Shipments with Air Mail

    Europe Countries

    2-3 Weeks (Sometimes Less)


    3-4 Weeks


    4-6 Weeks

    African Countries

    4-6 Weeks


    2-3 Weeks


    3-4 Weeks


    3-6 Weeks


    4-5 Weeks

    *Peru, Ecuador, Colombia

    4-6 Weeks


    4-6 Weeks


    3-4 Weeks

    Saudi Arabia

    3-4 Weeks

    Middle Asia Countries

    3-4 Weeks


    2-3 Weeks

    Mongolia, China

    4-6 Weeks

    United Kingdom, Ireland

    3-4 Weeks

    Latvia, Estonia, Lithuania

    3 Weeks


    2-3 Weeks

    *Mexico, Peru, Ecuador & Colombia shipments can lose too much time at transits after exiting.

    We are sending shipment code but this can be only trackable inside your country. We suggest this countries to DHL express (3-5 Days arrival time) for more reliable and tracking option.

    These countries are the only examples. If your country is not in the list, don't be afraid. We are shipping to all over the world including your country too:)

    What is your return policy?

    You may return a product for refund or exchange (if due to our error) within 30 days of the order shipment date. (The order shipment date and order notification are provided to you by email). All returns must be accompanied with a Return Merchandise Authorisation number (order number #).

    If we shipped you the wrong product, or it arrived defective or damaged

    No problem. Just contact us within 30 days of the item's original shipping date to arrange for the return of your purchase. Send us photo of wrong product. And we will send a replacement or refund you for your purchase, provided the returned item(s) are received back in their original packaging, along with all accessories, warranty cards, manuals, software, etc., where applicable.

Prepared by  T-Soft E-Commerce.